next up previous contents index
Next: STORE CORRECTION Up: STORE Previous: STORE   Contents   Index


STORE AMPLITUDE

        CLIC\STORE AMPLITUDE [/BAND LSB|USB|DSB] [/SELF]
                        [/POLAR HORIZONTAL|VERTICAL|BOTH]

    Store the amplitude calibration determined by the last SOLVE AMPLITUDE.

    One  calibration  curve is stored for each sideband.  With option "/BAND
    code", one may use the calibration curve  determined  with  one  of  the
    sidebands  (`code' is UPPER or USB, LOWER or LSB, or AVERAGE or DSB), to
    calibrate both sidebands. With option /POLAR, one may use  the  calibra-
    tion curve determined with one of the polarizations.

    With  option "/SELF", the calibration stored will not be the calibration
    curve (as determined from the last SOLVE  AMPLITUDE  command)  but,  for
    each  scan,  the visibility corresponding to the first subband set (eg.,
    SET SUB L01 to L03 ...); data from each side band will be used to  cali-
    brate  the same side band. This provide a simple, easy way to self-cali-
    brate data taken on strong continuum sources (quasars).

    STORE AMPLITUDE and STORE PHASE can be  performed  simultaneously  using
    STORE  AMPLITUDE  PHASE  [/BAND code] [/SELF] [/RECEIVER irec] (the /RE-
    CEIVER option has no meaning for amplitudes).


Gildas manager 2024-03-28